TP-LINK TAPO C400S2 | SMART WIRE-FREE SECURITY 2-CAMERA SYSTEM WITH HUB
FEATURES:
- 1080p Full High Definition – Check 24 hours clear view through the Tapo App
- 180-Day Battery Life – Rechargeable and removable battery with a low-power protocol extends your usage
- Smart AI Detection and Notification – Smart AI identifies people, pets and cars, notifying users as needed
- Wire-Free Placement – No wires means you can place the cameras almost anywhere inside or outside
- Sound Alarm – Triggers sound as an alarm when motion is detected
- Two-Way Audio – Enables communication through a built-in microphone and speaker
- Flexible Storage Choices – Save recorded videos on the hub-installed microSD card (up to 512 GB) or by using Tapo Care cloud storage services
- IP65 Water and Dust Resistant – Offers excellent waterproof and dustproof performance for outdoor scenarios
3 in stock
TP-Link Tapo C400S2 | Smart Wire-Free Security 2-Camera System with Hub
Smart. Secure. Easy.
Install Anywhere with Long Battery Life
FEATURES:
- 1080p Full High Definition - Check 24 hours clear view through the Tapo App
- 180-Day Battery Life - Rechargeable and removable battery with a low-power protocol extends your usage
- Smart AI Detection and Notification - Smart AI identifies people, pets and cars, notifying users as needed
- Wire-Free Placement - No wires means you can place the cameras almost anywhere inside or outside
- Sound Alarm - Triggers sound as an alarm when motion is detected
- Two-Way Audio - Enables communication through a built-in microphone and speaker
- Flexible Storage Choices - Save recorded videos on the hub-installed microSD card (up to 512 GB) or by using Tapo Care cloud storage services
- IP65 Water and Dust Resistant - Offers excellent waterproof and dustproof performance for outdoor scenarios
SPECIFICATIONS:
CAMERA | |
Image Sensor | 1/3" Progressive Scan CMOS Starlight Sensor |
Lens | Focal Length: 3.15mm |
Aperture: F2.0 | |
Field of View: 114° (Diagonal) | |
Night Vision | 850 nm IR LED 15m |
Interface & Button | 1× SYNC/RESET Button |
Hub Compatibility | Compatible with H200 (Included) |
View Range | 114° |
Resolution | 1080p Full HD (1920 × 1080) |
HUB | |
Device Compatibility | Works with Tapo smart sensors, buttons, Sub-1G switches, cameras and video doorbells |
Connection Capacity | Up to 64 Sub-1G switches, sensors or buttons + 4 cameras or video doorbells |
Interface & Button | 1× Ethernet Port |
1× RESET Button | |
1× SYNC Button | |
1× MicroSD Card Slot (Up to 512 GB) | |
VIDEO AND AUDIO | |
Maximum Resolution | Full HD 1080p (1920 × 1080) |
Frame Rate | 15fps |
Digital Zoom | 9× |
Video Compression | H.264 |
Live View | Yes |
Image Enhancement | 3DNR |
WDR | |
Audio Input & Output | Built-In Microphone and Speaker |
Audio Communication | Two-Way Audio with Noise Cancellation |
Siren Volume | Camera: |
92 dB (Level measured at 10cm distance) | |
Hub: | |
100 dB (Level measured at 10cm distance) | |
STORAGE | |
Local Storage | MicroSD Card Slot on Camera (Up to 512 GB) |
Cloud Storage | Tapo Care Cloud Storage Services (Subscription required) |
VIDEO | |
Frame Rate | 15fps |
Video Streaming | 1080p |
Video Compression | H.264 |
Audio Compression | G.711 |
DETECTION AND NOTIFICATIONS | |
Sensor | Single Motion Sensor (FOV: 110° horizontal) |
Single Ambient Light Sensors | |
AI Detection | Motion Detection |
Person Detection | |
Pet Detection | |
Vehicle Detection | |
Activity Zones | Yes |
Output Notification | System Notification |
System Notification with Snapshot (Tapo Care Services) | |
NETWORK | |
Network Connectivity | Connect via Wi-Fi or Ethernet |
Wireless Connectivity | IEEE 802.11b/g/n, 2.4GHz Wi-Fi |
Protocol | TCP/IP, ICMP, DNS, HTTPS, TCP, UDP |
Ethernet Port | 1× 10/100Mbps RJ45 Port on Hub |
Wireless Security | WPA/WPA2-PSK |
Security | 128 bit AES encryption with SSL/TLS |
Wi-Fi Protocol | IEEE 802.11b/g/n, 2.4GHz |
Frequency | 2.4GHz |
SECURITY | |
Security | 128-bit AES Encryption with SSL/TLS |
WPA/WPA2-PSK | |
POWER | |
Power Source | Hub: |
9V 0.85A DC Power Adapter | |
Camera: | |
6700mAh 5V 1A Removable Rechargeable Lithium-ion Battery | |
Input Voltage | Camera Battery Pack Adapter Input: 100~240V, 50/60Hz |
Hub Adapter Input: 100~240V, 50/60Hz, 0.3A | |
GENERAL | |
Smart Integration | Google Assistant, Amazon Alexa |
Weather Resistance | Camera: IP65 |
System Requirements | Tapo App: iOS 11.0 or higher, Android 5.0 or higher |
Mounting Options | Tabletop |
Ceiling-Mounted | |
Wall-Mounted | |
Operating Temperature | Camera: -20°C~45°C |
Hub: 0°C~40°C | |
Storage Temperature | -20°C~60°C |
Operating Humidity | 10%~90% RH, Non-condensing |
Storage Humidity | 5%~90% RH, Non-condensing |
Charging Temperature | 0-55°C |
Dimensions | Camera Dimensions: 110.6 × 64.2 × 64.2mm |
Hub Dimensions: 71.45 × 71.45 × 31.25mm | |
Package Contents | 2× Tapo C400 Cameras |
2× Tapo A100 Batteries | |
1× Tapo H200 Hub | |
1× USB Adapter | |
1× USB Adapter Cable | |
1× DC Power Adapter | |
4× Mounting Anchors | |
4× Mounting Screws | |
2× Mounting Templates | |
2× Camera Brackets | |
1× Quick Start Guide | |
1× RJ45 Ethernet Cable | |
Certifications | CE, FCC, RoHS, RCM |
ACTIVITY NOTIFICATIONS | |
Input Trigger | Motion detection, Person detection, Pet detection, Vehicle detection |
Output Notification | Notification, Snapshot (Tapo Care), Clips (Tapo Care) |
OTHERS | |
Certification | CE, RoHS, RCM |