LINKQNET 5048TG2 | PREMIUM 5KW OFF-GRID / GRID BACKUP MPPT SOLAR INVERTER
FEATURES:
- Parallel-Able Pure Sinewave Inverter with Unity Power Factor
- Built in 6000W MPPT High Voltage Solar Charge Controller (500V DC MAX)
- Configurable Input Voltage Range for Home Appliances or UPS Transfer (<10ms)
- Configurable Smart Battery Charging Current Based on Application with BMS Support
- Configurable AC/Solar Charger Priority with Load Power Source Mixing
- Battery Independent Design (MPPT voltages > 130V DC – Single Unit Only)
- Compatible With Mains or Generator Power
- Auto Restart When AC Recovers or PV Power is Available
- Overload / Over Temperature / Short Circuit Protection, Quieter Variable Speed Fans
- Dual Programmable AC Outlets (Allows You to Split Essential Loads and Critical Loads)
- Cold Start Function, Wi-Fi Monitoring Included (Wi-Fi Coverage is Required at Install Site)
58 in stock
LinkQnet 5048TG2 | Premium 5KW Off-Grid / Grid Backup MPPT Solar Inverter
Solid and Reliable: The LinkQnet range of multi-functional inverters have been designed to tolerate African power grid and environmental conditions and are intended to be installed by a qualified electrician or certified solar solution provider in accordance with SANS 10142-1. If you are not qualified then Linkqage will always direct you to one of our many registered installers.
FEATURES:
- Parallel-Able Pure Sinewave Inverter with Unity Power Factor
- Built in 6000W MPPT High Voltage Solar Charge Controller (500V DC MAX)
- Configurable Input Voltage Range for Home Appliances or UPS Transfer (<10ms)
- Configurable Smart Battery Charging Current Based on Application with BMS Support
- Configurable AC/Solar Charger Priority with Load Power Source Mixing
- Battery Independent Design (MPPT voltages > 130V DC - Single Unit Only)
- Compatible With Mains or Generator Power
- Auto Restart When AC Recovers or PV Power is Available
- Overload / Over Temperature / Short Circuit Protection, Quieter Variable Speed Fans
- Dual Programmable AC Outlets (Allows You to Split Essential Loads and Critical Loads)
- Cold Start Function, Wi-Fi Monitoring Included (Wi-Fi Coverage is Required at Install Site)
SPECIFICATIONS:
| INVERTER | PEAK POWER | 5000VA (10000VA surge for max 10 seconds) | |
| RMS POWER | 5000W (PF=1) | ||
| AC VOLTAGE | 230V (220V - 240V Adjustable) | ||
| AC WAVEFORM | Pure Sine Wave (50Hz / 60Hz Auto sensing) | ||
| EFFICIENCY (Peak) | >94% | ||
| DC VOLTAGE | 48V (Single unit can operate without batteries if MPPT voltage > 130V DC) | ||
| TRANSFER TOLERANCE | 170V to 280V (UPS Mode) / 90V to 280V (Appliance Mode) | ||
| TRANSFER TIME | 10ms (UPS Mode) / 20ms (Appliance Mode) | ||
| CHARGING | AC CHARGE | 80A (Adjustable) | |
| SCC TYPE | MPPT | ||
| SCC VOLTAGE | 120V - 430V DC | ||
| MAX PV OC VOLTAGE | 500V DC | ||
| MAX SCC POWER | 6000W | ||
| SCC CHARGE | 80A (Adjustable) | ||
| MAX COMBINED CHARGE | 80A (Adjustable) | ||
| SCC EFFICIENCY | 98% | ||
| STANDBY POWER CONSUMPTION | 2W (Inverter can be configured to shut down if no load is present) | ||
| OPTIONS | PARALLEL CAPABLE | Up to nine units in 1PH or three units in 3PH - Parallel kit included | |
| COMMUNICATION | USB-B, Wi-Fi Module Included | ||
| BATTERY TYPES | Flooded, AGM, GEL, Li-Ion, Super Capacitor, Custom | ||
| BMS SUPPORT | Yes - RS485/CANbus port for LinkQnet Li-FePO4 battery or compatible packs | ||
| WIFI SUPPORT | Wi-Fi cloud data logging dongle included (2.4GHz, WPA2 WiFi is required) | ||
| RELAY SUPPORT | Relay Port (NC/NO) for remote control of a generator start or other devices | ||
| WARRANTY | Two Years - Conditional | ||
| PHYSICAL | WEIGHT | 8.45kg | |
| DIMENSIONS | 110mm(d) x 300mm(w) x 440mm(h) | ||
| OPERATING HUMIDITY | 5% to 95% Relative Humidity (non- condensing) | ||
| OPERATING TEMPERATURE | 0°C to 50°C (Room Temperature) | ||
| INSTALLATION | INSTALLATION ENVIRONMENT | Indoor environment with no exposure to direct external air in coastal regions | |
| INPUT ISOLATOR and SPD | 40A-63A dual pole (to be purchased) Surge Protection Device recommended | ||
| INPUT CIRCUIT BREAKER | 40A normal curve (to be purchased) | ||
| OUTPUT CIRCUIT BREAKER | 25A normal curve (to be purchased) | ||
| BYPASS SWITCH | 40A-63A dual pole, double throw with centre off (to be purchased) | ||
| OUTPUT ISOLATOR | 25A-63A dual pole (to be purchased) | ||
| EARTH LEAKAGE RELAY | 63A with 30mA break leakage for plug circuits (to be purchased) | ||
| PV CONFIGURATION and SPD | 2 x 20A 600V Solar Fuse / Isolator with surge protection device is required if PV panels are installed. Typical PV layout is 9 x 380W to 600W panels is series. | ||
| INSTALLATION COMPETENCY | Not consumer installable. Needs to be wired into building electrical system. Requires qualified electrician with CoC for municipal and insurance compliance. | ||
| RUNTIMES | Typical Runtimes with new LinkQnet Li-FePO4 battery packs | ||
| Load (W) | With 1 x 100Ah pack (hh:mm) | With 2 x 100Ah pack (hh:mm) | |
| 500W | 10h:16m | 21h:28m | |
| 1000W | 04h:28m | 10h:13m | |
| 1500W | 02h:38m | 06h:42m | |
| 2000W | 01h:51m | 04h:31m | |
| 2500W | 01h:30m | 03h:35m | |
| 3000W | 01h:16m | 03h:02m | |
| 3500W | 01h:05m | 02h:21m | |
| 4000W | 00h:50m | 01h:52m | |
| 4500W | 00h:44m | 01h:40m | |
| 5000W | (Not possible) | 01h:30m | |
| Linkqage endeavours to research customer feedback and continuously upgrade our products so specifications may be altered slightly to improve customer value and enhance performance. | |||
| Rev: 20230523A/BR | |||
