LENKENG IMCS-IM02 | 4K @60HZ HDMI EXTENDER MATRIX WITH POE
FEATURES:
- Built on ipcolor STREAM™ technology to deliver high-definition and low-latency transmission
- Supports up to 3840×2160 @60Hz resolution
- Compatible with Cat5e/6 or higher-level networking cables, transmission distance of CAT6 cable is 120m
- Supports one-to-one or many-to-many connections through a gigabit switch
- Supports RS232 passthrough and control
- The transmitter supports HDMI loop-out.
- Supports bi-directional IR pass-back (20~60KHz)
- Supports IR learning remote and control device by APP
- Supports I/O interface control
- Supports POE (Power over Ethernet)
- Creating multi-screen splicing with up to 5×5 (also includes 1×1 / 1×2 / 1×3 / 1×4 / 1×5 / 2×1 / 2×2 / 2×3 / 2×4 / 2×5 / 3×1 / 3×2 / 3×3 / 3×4 / 3×5 / 4×1 / 4×2 / 4×3 / 4×4 / 4×5 / 5×1 / 5×2 / 5×3 / 5×4 / 5×5) video wall through a switch and controlled by APP.
- Supports 256× signal source inputs and 256× signal outputs, providing a flexible many-to-many matrix configuration (Requires APP control operation while connecting more than 100 TX-to-RXs)
- Firmware upgrading via Micro USB port
- Lightning, surge and ESD protection
- Stable 24/7 operation
Lenkeng iMCS-IM02 | 4K @60Hz HDMI Extender Matrix with PoE
This 4K @60Hz HDMI Extender allows switching, extending and distributing audio and video signals via an IGMP switch. Built on ipcolor STREAM™ technology to deliver high-definition and low-latency transmission. The transmitter can extend 256× signal sources and switch to 256× receiving terminals. The HDMI signal can be extended up to 120m over CAT6 or higher-level network cable while supporting one-to-one connection and many-to-many connections. Equipped with HDMI loop-out, bi-directional IR passback, RS232 command control, I/O, POE, etc.
FEATURES:
- Built on ipcolor STREAM™ technology to deliver high-definition and low-latency transmission
- Supports up to 3840×2160 @60Hz resolution
- Compatible with Cat5e/6 or higher-level networking cables, transmission distance of CAT6 cable is 120m
- Supports one-to-one or many-to-many connections through a gigabit switch
- Supports RS232 passthrough and control
- The transmitter supports HDMI loop-out.
- Supports bi-directional IR pass-back (20~60KHz)
- Supports IR learning remote and control device by APP
- Supports I/O interface control
- Supports POE (Power over Ethernet)
- Creating multi-screen splicing with up to 5x5 (also includes 1x1 / 1x2 / 1x3 / 1x4 / 1x5 / 2x1 / 2x2 / 2x3 / 2x4 / 2x5 / 3x1 / 3x2 / 3x3 / 3x4 / 3x5 / 4x1 / 4x2 / 4x3 / 4x4 / 4x5 / 5x1 / 5x2 / 5x3 / 5x4 / 5x5) video wall through a switch and controlled by APP.
- Supports 256× signal source inputs and 256× signal outputs, providing a flexible many-to-many matrix configuration (Requires APP control operation while connecting more than 100 TX-to-RXs)
- Firmware upgrading via Micro USB port
- Lightning, surge and ESD protection
- Stable 24/7 operation
SPECIFICATIONS:
| Item | Transmitter (TX) | Receiver (RX) |
| VIDEO | ||
| Input Interface | 1× HDMI | 1× RJ45 |
| Output Interface | 1× HDMI | 1× HDMI |
| 1× RJ45 | ||
| HDMI Length | ≤5m | |
| Maximum Transfer Rate | 18Gbps | |
| Compatibility | HDMI 2.0 | |
| HDCP 1.4 / HDCP 2.2 | ||
| Resolutions | 4096×2160 @24/30Hz, 3840×2160 @24/30/50/60Hz, 1080p @50/60Hz, 720p @50/60Hz, 1920×1200 @60Hz, 2560×1440 @60Hz | |
| Connection Types | One-to-One Connection | |
| Many-to-Many Connection | ||
| Switch Cascading | ||
| Transmission Distance | CAT5e 100m | |
| CAT6 120m | ||
| Transmission Latency | 4K @60Hz: 130~200ms | |
| 1080p @60Hz: 70~130ms | ||
| AUDIO SIGNAL | ||
| Input Interface | 1× HDMI | 1× RJ45 |
| Output Interface | 1× HDMI | 1× HDMI |
| 1× RJ45 | ||
| HDMI Output | LPCM 2.0 | |
| COMMAND SIGNAL | ||
| Input Interface | 1× 3.5mm IR Input | |
| 1× 3.5mm IR Output | ||
| IR Receiving Range | ≤5m | |
| IR Frequency | 20~60kHz | |
| RS232 (GND / RXD / TXD) | Default Baud Rate: 115200 | |
| Supported: 2400, 4800, 9600, 19200, 38400, 57600, 115200 | ||
| POWER | ||
| Power Supply | DC5V 2A (Alternative) | |
| Power Consumption | TX: ≤5.5W | RX: ≤3.5W |
| OPERATING ENVIRONMENT | ||
| Working Temperature | -20~60°C | |
| Storage Temperature | -30~70°C | |
| Humidity | 0~90% RH (No Condensation) | |
| PHYSICAL PROPERTIES | ||
| Housing | Metal | |
| Weight | 523g | 514g |
| Colour | Black | |
| Dimensions (L × W × H) | 191 × 96 × 25mm | |
| Protection | ESD Protection | |
| Lightning Protection | ||
| Surge Protection | ||
| 1a Contact Discharge Level 2 (±4KV) | ||
| 1b Air Discharge Level 3 (±8KV) | ||
| Implementation of the Standard: IEC61000-4-2 | ||
COMPARISON CHART:
| Model | IMMS-IM02-TX | IMMS-IM02-RX | RX-MULTIVIEW |
| Max. Video Resolution | 4K @ 60Hz 4:4:4 | ||
| LAN | 1Gbps | ||
| Extension Distance | 120m | ||
| Audio Extraction | No | No | 3.5mm L/R |
| HDMI Loop-Out | Yes | No | No |
| Bi-Directional IR | Yes | Yes | No |
| IR Learning | Yes | ||
| RS232 | Yes | ||
| RS485 | No | No | Yes |
| RS422 | No | No | Yes |
| I/O | Yes | ||
| Video Wall | No | up to 5×5 | No |
| Multiview | No | No | up to 3×3 |
| APP Control | Yes | ||
| PoE | Yes | ||
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Type | Transmitter, Receiver |
Related products
-
LINDY SINGLE SNAP-IN FACE PLATE – 86X86MM
Login to view price -
BRACKET – LOCKABLE DVD/AV CABINET – Accessories of TT02 series products
Login to view price -
LENKENG HDMI 4X1 QUAD-SPLIT MULTIVIEWER SWITCH
Login to view price -
ZOWEETEK 92-KEY TOUCH-PAD BLUETOOTH MINI KEYBOARD
Login to view price -
LINDY SNAP IN FACE PLATE FOR HDMI AND USB
Login to view price
