SYNOLOGY E10M20-T1 | M.2 SSD AND 10GBE COMBO ADAPTER CARD FOR PERFORMANCE ACCELERATION
FEATURES:
- Upgrade Your Synology System Immediately – Boost I/O performance and networking bandwidth simultaneously
- 10GbE Ready – Single 10GBASE-T port capable of auto-negotiating between 10/5/2.5/1Gbps and 100Mbps
- NVMe SSD Enabled – Dual M.2 22110/2280 NVMe SSD slots for cache acceleration without occupying storage drive bays
- Reach Optimal Caching Performance – Supports Synology SNV3000 series NVMe SSD with superior performance and reliability
4 in stock
Synology E10M20-T1 | M.2 SSD and 10GbE Combo Adapter Card for Performance Acceleration
10GbE Bandwidth and M.2 SSD Cache, All-at-Once
Synology E10M20-T1 helps you boost I/O performance and network bandwidth simultaneously using just one PCIe expansion slot on your Synology NAS
FEATURES:
- Upgrade Your Synology System Immediately - Boost I/O performance and networking bandwidth simultaneously
- 10GbE Ready - Single 10GBASE-T port capable of auto-negotiating between 10/5/2.5/1Gbps and 100Mbps
- NVMe SSD Enabled - Dual M.2 22110/2280 NVMe SSD slots for cache acceleration without occupying storage drive bays
- Reach Optimal Caching Performance - Supports Synology SNV3000 series NVMe SSD with superior performance and reliability
SPECIFICATIONS:
| GENERAL | |
| Host Bus Interface | PCIe 3.0 x8 |
| Bracket Height | Low Profile and Full Height |
| Size (H × W × D) | 71.75 × 200.05 × 17.70mm |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Relative Humidity | 5% to 95% RH |
| Warranty | 5-Years |
| Notes | The warranty period starts from the purchase date as stated on your purchase receipt |
| STORAGE | |
| Storage Interface | PCIe NVMe |
| Supported Form Factor | 22110 / 2280 |
| Connector Type and Quantity | M-Key, 2× Slots |
| NETWORK | |
| IEEE Specification Compliance | IEEE 802.3x Flow Control |
| IEEE 802.3u Fast Ethernet | |
| IEEE 802.3ab Gigabit Ethernet | |
| IEEE 802.3bz 2.5Gbps / 5Gbps Ethernet | |
| IEEE 802.3an 10Gbps Ethernet | |
| Data Transfer Rates | 10Gbps |
| Network Operation Mode | Full Duplex |
| Supported Features | 9KB Jumbo Frame |
| TCP/UDP/IP Checksum Offloading | |
| Auto-negotiation between 100Mb/s, 1Gb/s, 2.5Gb/s, 5Gb/s, and 10Gb/s | |
| TCP Segmentation Offload (TSO) | |
| Large Send Offload (LSO) | |
| Receive Side Scaling (RSS) | |
| Generic Receive Offload (GRO) | |
| Generic Segmentation Offload (GSO) | |
| COMPATIBILITY | |
| NVMe SSD | SA Series: SA6400, SA3610, SA3600, SA3410, SA3400 |
| 23 Series: RS2423RP+, RS2423+ | |
| 22 Series: RS822RP+, RS822+, DS3622xs+, DS2422+ | |
| 21 Series: RS4021xs+, RS3621xs+, RS3621RPxs, RS2821RP+, RS2421RP+, RS2421+, RS1221RP+, RS1221+ | |
| 20 Series: RS820RP+, RS820+ | |
| 19 Series: DS2419+II, DS2419+, DS1819+ | |
| 18 Series: RS3618xs, RS2818RP+, DS3018xs, DS1618+ | |
| 17 Series: RS18017xs+, RS4017xs+, RS3617xs+, RS3617RPxs, DS3617xs | |
| Notes | DSM Version Requirement: 6.2.3-25426 or Later Version |
| DSM Version Requirement for RS18017xs+, RS4017xs+, RS3618xs, RS3617xs+, RS3617RPxs, DS3617xs and DS3617xsII: 7.0.1 or Later Version | |
Related products
-
Synology AC2200 mesh router. Dedicated Tri-band 2.13 Gbps (400+867+867 Mbps)
-
SYNOLOGY E25G30-F2 | DUAL-PORT 25GBE SFP28 ADD-ON CARD FOR SYNOLOGY SYSTEMS
-
SYNOLOGY HAT5300 | 3.5INCH ENTERPRISE SERIES SATA HARD DRIVES FOR SYNOLOGY SYSTEMS (4TB – 16TB)
-
SYNOLOGY HAT3300 | 3.5INCH PLUS SERIES HARD DRIVES FOR SYNOLOGY SYSTEMS (2TB – 16TB)
-
SYNOLOGY DISKSTATION DS1823XS+ | 8-BAY, AMD RYZEN V1780B, 8GB RAM – NO HDD
