LinkQnet 12Volt to 230Volt, 1KW Pure Sinewave Inverter with 50A, 600W PWM SCC
FEATURES:
- Pure sine wave inverter
- Output power factor 1
- Wide DC operating range
- Selectable input voltage range for home appliances and personal computers
- Selectable charging current based on applications
- Configurable AC/Solar input priority via LCD setting
- Compatible to AC mains or generator power
- Auto restart while AC is recovering
- Overload and short circuit protection
- Battery equalization for optimized battery performance and lifecycle
- Cold start function
- Optional RS232 to IP Web/SNMP Box available
Out of stock
Budget 230V 1kVA/1000W 12VDC Inverter with 20A AC Charger and 50A 600W PWM DC Solar Charger
Features:
- Pure sine wave inverter
- Output power factor 1
- Wide DC operating range
- Selectable input voltage range for home appliances and personal computers
- Selectable charging current based on applications
- Configurable AC/Solar input priority via LCD setting
- Compatible to AC mains or generator power
- Auto restart while AC is recovering
- Overload and short circuit protection
- Battery equalization for optimized battery performance and lifecycle
- Cold start function
- Optional RS232 to IP Web/SNMP Box available
| SPECIFICTATIONS | |
| Rated Power | 1000 VA / 1000 W |
| INPUT Voltage: Selectable Voltage Range: Frequency Range: |
230 VAC 170-280 VAC (For Personal Computers) 90-280 VAC (For Home Appliances) 50 Hz/60 Hz (Auto sensing) |
| OUTPUT AC Voltage Regulation (Batt. Mode): Continuous Power/Surge Power (10 seconds): Efficiency (Peak): Transfer Time: Waveform: |
230VAC ± 5% 1000VA/2000VA90-93% 10 ms (For Personal Computers) 20 ms (For Home Appliances) Pure sine wave |
| BATTERY Battery Voltage: Floating Charge Voltage: Overcharge Protection: |
12 VDC 13.5 VDC 16 VDC |
| SOLAR CHARGER & AC CHARGER Maximum PV Array Open Circuit Voltage: Maximum PV Array Power: Standby Power Consumption: Maximum Solar Charge Current: Maximum AC Charge Current: Maximum Charge Current: |
55VDC 600W 5W 50A 20A 50A |
| Dimensions | 88 x 225 x 320 mm 4.4 kg |
| ENVIRONMENT Humidity: Operating Temperature: Storage Temperature: |
5% to 95% Relative Humidity (Non-condensing) -10°C to 50°C -15°C to 60°C |
| Parallel Capability | Not Supported |
| INSTALLATION, WARRANTY AND SERVICE
Installation: Warranty: Service: |
Not consumer installable - Requires a qualified electrician with experience in off-grid, grid-connected and hybrid battery backup solar generation systemsTwo Years - Subject to installation by a qualified electrician with proof of a valid Certificate of ComplianceService is bring in and inspection, testing and component level repairs typically take ten working days |
Note: Due to continuous development and component upgrades, specifications are subject to change without notice.
