LINDY DVI-D MALE TO DVI-D FEMALE DUAL LINK CABLE
FEATURES:
- DVI-D Dual Link Extension Cable
- For use with all modern digital monitors, projectors, and TFT/LCD Flat Panel Displays
- Dual Link digital connection supports display resolutions of up to 2560 x 1600
- RF-BLOK shielding design
- Connectors: DVI-D Dual Link Male to DVI-D Dual Link Female
- Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield
- Increased insulation resistance up to 25%
- No soldering requirements as interconnect design needs no 360 degree soldering – eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material – soldering flux
- Tight fit of internal wires as there is no inner mould
- No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible
- Smaller overall dimensions which allows more room behind the host or peripheral
- Increased connector and mating strength – the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one
Lindy DVI-D Male to DVI-D Female Dual Link Cable
Features:
- DVI-D Dual Link Extension Cable
- For use with all modern digital monitors, projectors, and TFT/LCD Flat Panel Displays
- Dual Link digital connection supports display resolutions of up to 2560 x 1600
- RF-BLOK shielding design
- Connectors: DVI-D Dual Link Male to DVI-D Dual Link Female
- Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield
- Increased insulation resistance up to 25%
- No soldering requirements as interconnect design needs no 360 degree soldering - eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material - soldering flux
- Tight fit of internal wires as there is no inner mould
- No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible
- Smaller overall dimensions which allows more room behind the host or peripheral
- Increased connector and mating strength - the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one