3KVA 2700W ONLINE 2U RACK UPS WITH 6X12V9AH BATTERIES
FEATURES:
- True double-conversion pure sinewave output
- Microprocessor control optimizes reliability
- Input power factor correction
- Output power factor 0.9
- Programmable Power Outlets
- Emergency power off function (EPO)
- Wide input voltage (110V – 300V)
- Converter mode available
- ECO mode for energy saving
- Generator compatible
- Very high surge immunity up to 7KV, 13KA, 1300J
- High overload capability and enhanced short circuit protection
- Cold Start function
- USB and RS-232 Communication with free multiple server power control software
- Optional WEB/SNMP Network Card for remote monitoring and control
- LCD display allows easy monitoring and access of UPS status
- Six internal 12V 9AH batteries with option connector for additional battery pack
- Three stage smart battery charger extends battery life
- Accepts laser printer and medical ultrasound system load
- ESD / Surge protection and two year warranty on electronics
Out of stock
3kVa 2700W Online 2U Rack UPS with 6X12V9Ah Batteries
High Power Rugged Rackmount Online UPS
Features:
- True double-conversion pure sinewave output
- Microprocessor control optimizes reliability
- Input power factor correction
- Output power factor 0.9
- Programmable Power Outlets
- Emergency power off function (EPO)
- Wide input voltage (110V – 300V)
- Converter mode available
- ECO mode for energy saving
- Generator compatible
- Very high surge immunity up to 7KV, 13KA, 1300J
- High overload capability and enhanced short circuit protection
- Cold Start function
- USB and RS-232 Communication with free multiple server power control software
- Optional WEB/SNMP Network Card for remote monitoring and control
- LCD display allows easy monitoring and access of UPS status
- Six internal 12V 9AH batteries with option connector for additional battery pack
- Three stage smart battery charger extends battery life
- Accepts laser printer and medical ultrasound system load
- ESD / Surge protection and two year warranty on electronics
| SPECIFICTATIONS | |
| INPUT Nominal Voltage: Input Voltage Range: Frequency Range: Power Factor: Input Socket Type: Input Over-Current Protection: Input Surge / Lightning Protection: |
230 VAC - Single Phase with Ground 110 - 300 VAC (50% Load) 160 - 280 VAC (100% Load) 40Hz - 70Hz ≧ to 0.99 at 100% Load and Nominal Input Voltage IEC C20 Circuit Breaker (Manually Resettable) 400V Metal-oxide Varistors |
| OUTPUT Continious Output Power: Default Output Voltage: Voltage Regulation: Frequency Range (Synchronised): Frequency Range (Battery Mode): Current Crest Ratio: Harmonic Distortion: Transfer Time - AC to Inverter Mode: Transfer Time - Inverter to Bypass: Waveform: Output Socket Type: |
3000VA / 2700W 230 VAC (Programmable - 200/208/220/240 VAC) ± 1% 47Hz - 53Hz 50Hz ± 0.25Hz (or 60Hz ± 0.3Hz in converter mode) 3:1 ≦ 2% THD (Full Load) ≦ 4% THD (non-linear Load) Zero 4ms (Typical) Pure Sinewave IEC C13 (8 x sockets), IEC C19 (1 x socket) |
| EFFICIENCY AC Mode: Battery Mode: |
91% 90% |
| BATTERIES Battery Type: Number of Batteries (Internal): Typical Recharge Time: Charging Current: Charging Voltage: External Battery Pack Option: |
12V / 9AH AGM or 12V / 8 AH Gel Type Six 4-Hours to recover to 90% Capacity 1.5 Amp 82.1 VDC ± 1% Yes - Anderson Plug for 72 VDC battery pack |
| INDICATORS LCD: |
Status, Load Level, Battery Level, Input/Output Voltage, Discharge Timer and Fault Condition |
| ALARM Mains Fail / Battery Mode Alarm: Low Battery: Overload: Fault: Alarm Silence RS-232 Serial Port Monitoring: USB Port Monitoring: WEB / SNMP Network Slot: |
Sounding every 5 seconds Sounding every 2 seconds Sounding every second Continuously sounding Yes - Mains Fail / Battery alarm via front panel Yes - Supports Windows, Linux, Synology and MAC Yes - Supports Windows, Linux, Synology and MAC Option - Supports full remote network management |
| Dimensions | 630 x 438 x 88 mm 27.4 kg |
| ENVIRONMENT Humidity: Noise Level: |
20-90% RH @ 0-40 deg.C (Non-condensing) Less than 50dB @ 1 Meter |
| OPTIONS Mounting: Optional Rackmount Rail Kit: Optional Static Bypass Switch: IEC Male / Female Power Cord: IEC Male to RSA Multi-plug: |
2U Rack-mount, Requires optional fixed rail Kit Enables the UPS to be installed into a network rack Enables the UPS to be bypassed and fully isolated Enables a direct connection to the PC or Server Allows you to connect normal RSA plugs to the UPS |
