



1000VA AVR Line Interactive UPS
Featuring a smart microprocessor control design, AVR Boost and Buck, Smart RS232/USB Interface and Cold Start Function. A cost-effective solution to your mission-critical PC and valuable peripherals.
Features:
- AVR Boost and Buck
- Cold Start Function
- Smart RS232/USB Interface for Power Management
- Built-in Self-diagnostic Function
- Modem/LAN Internet Protection
- Compatible with Generator Set
- LED Display
- Fastest Charging Capacity
- Auto Charging in Off Mode
SPECIFICTATIONS | |
Average Power | 1000VA |
RMS Power | 600W |
INPUT Rated Input Voltage: Accepted Input Voltage Range: Input Frequency: |
230V AC 162V AC - 290V AC 50Hz |
OUTPUT Rated Output Voltage: Voltage Regulation (On Battery): Frequency Range (On Battery): Mains to Battery Transfer Time: Output Waveform (On Battery): |
230V AC +10% to -10% 49Hz to 51Hz (50Hz) 2ms to 6ms Simulated Sinewave |
BATTERY Battery Type: Battery Quantity: Battery String Voltage: Storage Capacity (Watt Hours): Battery Recharge Time: Standard Protection: Surge/Lightening Protection: AVR Buck and Boost Control: Cold Start Function: |
12V 7AH 2 24V 168Wh Six to Eight Hours Overload, Battery Discharge and Battery overcharge protection >400V for 2-seconds (Live to Neutral, Live to Earth and Neutral to Earth) Double Boost to correct low input voltage and single buck to protect high input voltage conditions Yes - Unit will power up without mains voltage on the input |
BATTERY Battery Type: Numbers: Typical Recharge Time: Charging Current (max.): Charging Voltage: |
12 V / 7 Ah 2 4 hours recover to 90% capacity 1 A 27.4 VDC ±1% |
LAN / Telephone Protection | Yes - Two RJ45 Ports provide surge and spike protection for LAN cable |
Generator Compatibility | Yes - Wide Input Range to cater for AVR controlled generators |
ALARM Power Fail Alarm: Battery Low Alarm: Overload Alarm: Fault Alarm: Alarm Disable: |
Beep every 10 seconds Beep every second Beep every half second Continuous Beep Yes - Power fail alarm can be tuned off via software only |
INDICATORS Display Type: AC Mode Indication: Power Fail Indication: Fault Indication: |
Red, Green and Yellow LED On Green LED Flashing Yellow LED On Red LED |
ENVIRONMENT Operating Humidity: Operating Temperature: |
0% to 90% Relative Humidity 0 Deg.C to 40 Deg.C (Non-Condensing) |
Dimensions | 149.3 x 162 x 338 mm 7.8 kg |
MANAGEMENT Monitoring Interfaces: Software CD: USB Cable Included: Output Cables: Input Cables: |
USB, DB9-F Serial Yes - UPSilon 2000 Software 1m USB-A to USB-B 2 x 1m IEC C13 to C14 (Kettle Male to Kettle Female) None - Supply own IEC C13 Kettle Plug (Normally existing PC Power Cable) |